Goettlich Ranch - Lone Creek Division
Inventory Reduction Auction
THURS, NOV 7, 2019 10 AM
Location: 1763 Big Sage Lane, Winifred, MT
14 miles NE of Winifred, MT ● 53 miles NE of Lewistown ● 180 miles N of Billings
Owners: Goettlich Ranch, Trent & Laurie Goettlich, Hilger, MT
CELL SIGNAL IS NOT RELIABLE. IF YOU CANNOT BE AT THE AUCTION, PLAN TO CALL EARLY OR BID ONLINE.
10 A.M. – Shop Tools & Equipment
11 A.M. – Tanks, Livestock Equipment, Attachments
12 Noon – ATV’s, Trailers, Vintage Truck
1 P.M. – Pickups, Semi, Snow Cat
2 P.M. – Tractors, Hay Equipment
3 P.M. – Farm Equipment, Calf Shelters, Windbreaks
Auctioneer’s Note: Trent & Laurie will continue to operate at their home ranch near Hilger, but have decided not to renew their lease of the Lone Creek Ranch northeast of Winifred. They are dispersing 700 cows and liquidating their equipment on that ranch. This is a very clean line of late-model equipment that has been well maintained and is ready to go back to work! We invite you to join us for the day. ~Jayson & Kyle Shobe
TRACTORS & SNOW CAT
- 2013 JD 6140M w/ JD H360 loader, 8’ bucket/grapple, 2070 hrs., 4.5L diesel, no DEF, 145 eng hp/114 pto hp, PowrQuad – 16 f/r, 3 hyd., 3pt., dual pto, deluxe cab w/ sun roof & buddy seat, rears 460/85R38 60%, fronts 380/85R28 90%/60%, upgraded rubber fuel line
- 2008 JD 7430 Premium w/ JD 741 loader, 9’ bucket/new grapple, 5518 hrs., 6.8L diesel, no DEF, 166 eng hp/140 pto hp, PowrQuad Plus - 16 f/r, 3 hyd., 3pt., dual pto, deluxe cab, rears 480/80R42 60%, fronts 380/85R30 60%. This tractor was primarily an auger tractor and nearly all the recorded hours are pto hours. Excellent condition and ready to roll for a long time!
- 2008 JD 7230 w/ JD 741 loader, 8’ bucket/grapple, 4300 hrs., 6.8L diesel, no DEF, 135 eng hp/110 pto hp, SynchroPlus – 12 fwd/4 rev, 2 hyd., 3pt., dual pto, CAH, rears 460/85R38 70%, fronts 380/85R24 70%
- 2005 JD 7320 w/ JD 741 loader, 7’ bucket/grapple, 5671 hrs., 6.8L diesel, no DEF, 125 eng hp/105 pto hp, PowrQuad – 16 f/r, 3 hyd., 3 pt., dual pto, rear 18.4R38 90%, front 420/85R26 75%
- 2004 JD 7720 w/ JD 746 loader, 8’ bucket/grapple, 7899 hrs., 6.8L diesel, no DEF, 182 eng hp/140 pto hp, PowrQuad Plus – 16 f/r, 3 hyd., 3pt., dual pto, CAH, rears 520/85R38 50%, fronts 420/85R28
- Bombardier 402 snow cat, Cummins diesel, hydrostatic, lever steering, 14’ 6-way blade, hyd. tilt & angle, joystick control, 66” steel tracks, cab, htr, rear pintle hitch, 3 hyd. remotes, 14,668 hrs. You’ll push 4 feet of snow and never slow down. This is a good-running, reliable snow monster!
- Ford 8N, pto, 3 pt.
- 2009 NH H8080N rotary swather, diesel, 1444 hrs., 2012 RD163 16’ header, steel conditioner, deluxe cab, a/c. Another good running unit that’s ready for next hay season!
- JD 569 round baler, Megawide Plus, twine & net, windrow compressor. Less than 3500 bales!
- 2015 Vermeer 605N DCF round baler, wide pickup, net only, bale kicker, 15,000 bales, belts 50%
- Vermeer R2300 twin rake, 18-23’, hyd. fold
- Haybuster 2650 bale processor, good condition
- Bale King Vortex R2010 bale processer, w/ grain attachment
- Case IH hay moisture tester, mdl. HMT-2, brand new
- 2012 Honda Big Red MUV 700 side-by-side, 4x4, cab, htr, 1300 hrs., 6974 mi., green
- 2010 Honda Big Red MUV 700 side-by-side, 4x4, cab, htr, 1268 hrs., 8838 mi., red
- 2012 Honda Rubicon 4-wheeler, TRX500 FPA, 4x4, auto, 1291 hrs., 10,130 mi., red
- 2005 Honda Foreman 4-wheeler, TRX500 FE5, elec. shift, good rubber, 543 hrs., 3567 mi., red
- 1998 Honda Foreman 4-wheeler, TRX450 ES, elec. shift, green
- JD LA175 riding mower, 54” deck, 239 hrs.
SEMI TRUCK & PICKUPS
- 1998 Freightliner, Detroit series 60, 12.7L diesel, 470 hp, 10 spd. transmission rebuilt in 2018, odom. reads 0042340, 283” wb, deluxe sleeper w/ bunks
- 2010 Ford F-250 Super Duty, 6.2L gas, 4x4, auto, ext. cab, Krogmann bale handler, The Rancher grill guard, 167,255 mi.
- 2002 Chevy 2500HD, 8.1L Vortec gas, 4x4, auto, ext. cab, LS trim, Krogmann bale handler, 180,042 mi.
- 2007 Ford F-350 dually, 2WD, V10 gas, 6 spd., single cab & chassis (no box), grill guard, 142,000 mi., recently replaced clutch, new rear end in 2015. Consigned by Daryl Smith, Winifred, MT.
- 1925 Ford TT 1 ton truck, heavy duty orig. frame and trans., 12’ oak flatbed box, last run 2013. Consigned by the Tony Arthur Estate, Winifred, MT.
- 2007 Wilson flat deck, 48’ x 96”, w/ hay rack, Road Brute steel frame, alum. deck
- 2004 Featherlite stock trlr, 24’ x 7’w x 78”h, alum w/ alum floor, 2 center gates w/ sliders, rear slider, near new tires. Excellent condition!
- 2001 Travalong stock trlr, 20’ x 6’8”w x 6’6”h, wood floor in good cond., w/ mats, ctr gate, rear slider, slam latch, mixed rubber
- 1998 Diamond D stock trlr, 20’ x 6’8”w x 6’6”h, wood floor w/ mats, ctr gate w/ slider, rear slider
- Shop-built flatbed trailer, tandem torsion axles, 18’
- Moly Mfg. Silencer squeeze chute, Ranch Model, dual-side controls, hyd. lower squeeze, hyd. neck extender bars, dual palp/walk thru, extra neck access, Honda 6.5 hp (gas) hyd. pump w/ quick couplers, HD yoke carrier trailer w/ torsion axles. Consigned by Kyle Innes, 307-660-2323
- Hi-Qual squeeze chute & palp cage, auto head catch
- For-Most calf table, auto head catch, reversible (set up for left side), like new!
- Thorson calf table, left side, one of the first calf tables in Fergus County!
- Taskmaster CF2000 slide-in cake feeder, 1-ton cap., 1-owner, used only 1-2 seasons
- (3) Apache creep feeders, used 1 season, like new!
- (9) Steel stand-alone windbreaks, 24’
- (8) Portable calf huts, 16’ x 8’
- (12±) wooden feeders, 16’
- (3) Koenders calf warmers
- Misc. elec. fence supplies
- Fencing supplies, post pounders, fence stretchers, barb wire, etc.
- Branding pot
- Number irons, full set, 4” hot irons
MONTANA LIVESTOCK BRANDS
- v/^ Cattle: LH Horses: LS
- +/+ Cattle: LH Horses: LT
- Also selling will be a pair of cowboy cuffs with the V/^ and a pair of chinks with both brands on them.
- Lowe hyd. post auger, skid steer attach, 12” bit
- Woods SS108-2 snow blower, 108”, twin auger, 3 pt. cat 3, 1000 pto, brand new!
- Land Pride RB3596 blade, 3 pt., 8’
- Notch pallet forks, tractor quick attach (41” hooks), 48” adj.
- (2) Danuser post augers, 3 pt.
- Fabian land roller, 15’, water filled
- Schafer offset disk, 15’, 22” disks
- JD 9350 drills, (4) 10’ sections w/ hitch & transport, 40’ total, 10” spacing, steel packers
- Fimco sprayer, 60 gal, 10’ booms & wand, on cart
- Slide-in sprayer/fire unit, 150 gal. tank, brand new Honda GX160 eng., new hose
- TWE propane well-site generator, Honda eng., 50 GAH, UAS III series, 5KW
- Hobart Champion welder/generator, on cart, 10KW, 230 DC/CC welder
- Puma portable air compressor, 5 hp, 20 gal
- Campbell-Hausfeld shop air compressor, 6.5 hp
- JD pressure washer, 2400 psi, 2.0 gpm, Honda eng., on cart
- Hobart Stickmate 205AC welder
- Miller MultiMatic 215 CC/CV welder, on cart, excellent condition!
- Onsite rolling tool chest
- Delta DP300L drill press, bench model
- Ace ½ hp shop grinder, 8”
- Ace bench vice, 6”
- DeWalt chop saw, 14”
- Honda 2500 generator, gas
- Shop Vac, 12 gal
- (4) Water fire extinguishers
- Schumacher battery charger, 200 amp
- Reddy Heater oil fired heater, 165k BTU
- Misc. shop tools, grinders, sawzalls, cordless drills, tap & die sets, socket sets, etc.
- Oxy-Acet welder set
- (2) Napa floor jacks, 3.5-T
- Shop creepers
- Trash pump, Honda 5.5hp eng., 2” in & out
- Misc. oil barrels & barrel pumps
- Pallet of bentonite, 40# bags
- Misc. steel pipe, pvc, etc.
- Bolt bin, 36”w x 42”h x 12”d
- Metal wall cabinets
- (2) 500 gal. fuel tanks, on stands, gas & diesel
- (1) 300 gal. fuel tank, on stand, dyed diesel
- (2) Service tanks w/ elec. pumps, 100-150 gal